Self-contained Composting Aerators
The horizontal aerator provides an economical mechanical solution for dewatering sludge in beds, building windrows, blending bulking agents or additives, pulverizing and aerating or water mixing for aerobic composting. The rapid handling rate exposes 100% of the material to oxygen immediately so that noxious odors can be absorbed. Handling costs can range from one to two cents per ton.
SIMPLE PROCEDURE
The Brown aerator works directly into the material forming it into a windrow. Windrows can be formed from piles of nearly any size. Alleyways are not required with this machine, so there is a great reduction in space requirements. The tires, clearances and propulsion system of the end loader (tool carrier) allows work on irregular bases and normally doesn't require a special work pad. The reverse rotation works the windrow from the bottom up and to the side.
LOW MAINTENANCE
The aerator is simple in design. The principle as a material mover has been proven with over 10 years as a sludge drying and composting tool. The intermittent aerator flights are reversible and bolt on, constructed from abrasion resistant carbon steel. Continuous flight aerators are also available on the SC3110, SC 3610 & SC3912.
Brown Bear Corporation, PO Box 29, Corning, IA 50841-0029. Tel: 515-322-4220; Fax: 515-322-3527.