Product/Service

Open-Ended Extrusion Balers

Source: American Baler Company
The company offers several open-end extrusion models designed to process a variety of fiber materials for moderate volume applications such as corrugated box plants, paper converters and printers
American Baler Company offers several open-end extrusion models designed to process a variety of fiber materials for moderate volume applications such as corrugated box plants, paper converters and printers. A single ram produces maximum psi force to form a dense, even bale against the side of the previously formed bale in the extrusion chamber. This chamber hydraulically and mechanically squeezes bales from three sides, then releases to allow the bale to move on through the chamber. The extrusion concept speeds production, and eliminates the need for ejection rams and bale separation doors. The balers are designed to be fed either mechanically or by pneumatic conveyor systems. They feature:

  • Replaceable bolted-in heavy-duty T-1 steel floor plate and plunger slides.
  • Programmable controller with digital readouts and data-table access module.
  • Trunnion-mounted main cylinder that puts less torque on the cylinder rod, seals, and packing rings.
  • Auto-tie models that feature unique electro/hydraulic auto-tier system.
  • Streamlined hydraulic system designed for ease of operation and maintenance.

    <%=company%>, 800 E. Center St., Bellevue, OH 44811. Phone: 419-483-5790; Fax: 419-483-3815.