Product/Service

Auto-Mate Series Truck

Source: Scranton Manufacturing Co., Inc.
Features of our Auto-Mate Series Truck
  • Narrow body design for greater accessibility and maneuverability
  • Transfer payload into a rearloader or transfer station
  • Continuous load and pack hopper cycling (optional)
  • Full pushout payload ejection
  • 8 and 10 yd3 capacities available
  • 2 yd3 hopper capacity
  • Excellent geometry with Manco's articulated boom system
  • Programmable joystick control
  • Fast 8 second bin grip and dump cycle
  • 9 foot reach
  • Grips all containers up to 95 gallon
  • 45° container dump angle
  • Long life componentry
  • Eliminate physical lifting of containers
  • Faster route times and decreased weather concerns

    Body Dimensions Auto-Mate 800 Auto-Mate 1000
    Width 90" / 2286 mm 90" / 2286 mm
    Length 165" / 4191 mm 188" / 4775 mm
    Height with Tailgate Open* 131" / 3327 mm 131" / 3327 mm
    Height of Lift Arm in Travel Position* 95" / 2413 mm 95" / 2413 mm
    Body Capacity 7.5 yd3 / 5.7 m3 9.5 yd3 / 7.3 m3
    Hopper Capacity 2 yd3 / 1.5 m3 2 yd3 / 1.5 m3
    Approximate Body Weight (empty) 7360 lbs / 3339 kgs 8060 lbs / 3656 kgs
    Approximate Payload 4500 - 6000 lbs
    2045 - 2725 kgs    		 5700 - 7600 lbs
    2585 - 3450 kgs
    Minimum Chassis Requirements
    Minimum GVWR 20700 lbs / 9390 kgs 23000 lbs / 10433 kgs
    Front Axle 7000 lbs / 3175 kgs 7500 lbs / 3400 kgs
    Rear Axle 14000 lbs / 6350 kgs 15800 lbs / 7170 kgs
    Recommended Cab to Axle 112" / 2845 mm 133" / 3378 mm
    Axle to Frame Cut Off 42" / 1067 mm 48" / 1219 mm

    Scranton Manufacturing Co., Inc., 101 State St., P.O. Box 336, Scranton, IA 51462. Tel: 712-652-3396; Fax: 712-652-3399.