The Fluffer box is fabricated from structural steel shapes and heavy steel plates. Upper and lower frames are 4" ship/car channel, with additional corner reinforcement plates. All wall panels are ¼" thick plate steel and adjacent to blade area is a 12" high reinforcement impact area of ½" thick steel. Fluffer dimensions are custom fit to opening size specified by customer's baler.
The main door assembly is fabricated from ½" structured steel and a ½" thick angle frames the steel door panel. A 2-15/16" hinge pin is encased in (5) ¾" wall mechanical tubing's with 3 bronze bushings.
Blade is fabricated from 1-1/2" thick plate steel.
For Hydraulic Actuated Doors Only:
Movement of doors and locks are controlled with hydraulic cylinders and self-contained hydraulic power pack. All cylinders are rated at maximum 3000 PSI.
All drive components are assembled, tested, guarded, and shipped as an integral part of the Fluffer, unless otherwise specified.
Karl W. Schmidt & Associates, Inc. (KWS), 3900 East 68th Avenue, Commerce City, CO 80022. Tel: 303-287-7400; Fax: 303-287-7474.