Product/Service

Emission Monitoring System

Source: Eco Waste Solutions Inc.

Emission Monitoring System
This is an electronic set of sensors that are used to continuously record information during the combustion process
This is an electronic set of sensors that are used to continuously record information during the combustion process.

Typically, under the most strict environmental laws, there is a requirement to continuously record operating parameters during the burning cycle such as:

Oxygen (O2)

Carbon Monoxide (CO)

Visible Emission (Opacity) – Smoke from the exhaust

These electronic sensors are capable of displaying the information to a computer screen and to provide reports for each cycle.

Maintenance must be done every 4 months on major components to re-calibrate and clean the sensors for peak accuracy. There is also 1 hour of monthly maintenance and 15 minutes of daily maintenance required.

Eco Waste Solutions Inc., 5195 Harvester Road, Unit 6, Burlington, ON L7L 6E9. Tel: 905-634-7022; Fax: 905-634-0831.