Galbreath Introduces The New Revolution 60k Hoist

WINAMAC, IN---Galbreath, Inc. introduces a new roll-off hoist called the Revolution 60K. This new roll-off hoist features faster and more efficient cycle times and is available in IO-Inside/Outside, OR-Outside Rail, EX-Extendable Tail, and HH-Deadlift models. It carries a three-year warranty when factory mounted.

The Galbreath Revolution 60K hoist is built with a 10-inch mainframe with no subframe, interchangeable 7-inch lift and winch cylinders, interchangeable cable sheaves with grease grooves and 2-1/2-inch shaft, and 2-1/2-inch floating full length rear hinge pin and bushing. Safety features include remote activated driver's side hoist safety props, mid-body turn signal, LED lighting, and an ergonomically-positioned inside air control tower for easier operation.

A special one-piece lower lift bracket incorporates the oil reservoir and a 36-inch toolbox and meets ISO hydraulic oil requirements for cleanliness. Other features include an automatic fold-up ICC bumper pinable for pintle hook use, a rear apron that is pre-drilled for optional pintle hook, heavy-duty quick change rear roller assembly, outboard supported side rollers, hoist frame huck that is bolted to the chassis, and hard-plumbed hydraulics for the hoist and tarp.

In addition to a wide range of roll-off hoists, Galbreath also produces hook hoists, roll-off containers, self-contained and stationary compactors, vertical balers, self-dumping hoppers, and replacement parts. More information can be obtained by visiting the company website at www.galbreath-inc.com. Galbreath is a division of Wastequip.