Open-end Extrusion Baler

These open-end extrusion models are designed to process a variety of fiber materials for moderate volume applications such as corrugated box plants, paper converters and printers. A single ram produces maximum psi force to form a dense, even bale against the side of the previously formed bale in the extrusion chamber. This chamber hydraulically and mechanically squeezes bales from three sides, then releases to allow the bale to move on through the chamber. The extrusion concept speeds production, and eliminates the need for expensive ejection rams and bale separation doors. Additional features include:

•Designed to be fed either mechanically or by pneumatic conveyor systems
•Replaceable bolted-in heavy-duty T-1 steel floor plate and plunger slides
•Programmable controller with digital readouts and data-table access module affords dependable automatic operation without an operator
•Trunnion-mounted main cylinder puts less torque on the cylinder rod, seals, and packing rings
•Auto-tie models feature unique electro/hydraulic auto-tier system for reliable wire control and fast, superior knot tying for reduced wire costs
•Streamlined hydraulic system designed for ease of operation and maintenance
•Meets all ANSI safety requirements
•Super high-density models available for difficult-to-bale materials like plastics, aluminum and ferrous cans

American Baler Company, 800 East Center Street, Bellevue, OH 44811. Tel: 419-483-5790; Fax: 419-483-3815.