Ribbon Mixer/Blender

Source: Aaron Equipment Company
Aaron blending results in uniformity and homogeneous, accurate mixing of all grades of
Aaron Equipment Companylending results in uniformity and homogeneous, accurate mixing of all grades of materials from granular, heavy density cakes, plastics and pigments to light, dry, fine powders.

The mixers are engineered and constructed for rugged, heavy-duty production. Their construction is fully welded for maximum strength, rigidity and to meet sanitary requirements.

All machine surfaces are clean and smooth for sanitation purposes and minimal waste. There are no projecting screws, nuts, bolts, pockets or ledges, and all corners are rounded to help eliminate material build-up that may cause contamination.

Anti-friction bearings in self-aligning pillow blocks assure a free, smooth and quiet running operation. Discharge of the finished batch is quick and clean through a positive shear gate valve that provides for complete or throttle discharge.

Aaron's split gland design meets the most rigid standards for sanitary servicing. Available with various packing materials to meet process requirements, glands open into four pieces allowing access to the shaft and the end plate for easy cleaning.

Dimpled jackets are available on all Aaron Mixers for steam, hot water or oil, if specified. Jackets can be built to ASME code.

<%=company%>, 735 E. Green St. P.O. Box 80, Bensenville, IL 60106. Tel: 630- 350-2200; Fax: 630-350-9047.