Waste Water Evaporator

The Fen-Tech Environmental Evap-O-Dry Water Evaporation System (patent pending) is designed to efficiently evaporate waste waters and remove the settled solids buildup from the evaporator tank bottom. A submerged burner tube fires below the solution level, which achieves 95%+ energy efficiency. The hot gas contact with the liquid creates almost instantaneous vapor while the combustion gasses rapidly mix the liquid for even heat distribution.The burner tube orifices are positioned below 180 deg. allowing the tube to be continuously self purging.

Turbulence in the Evaporator tank prevents simultaneous evaporation and solids removal. The Evaorator must be turned off for a period of time to allow for settlement, prior to removal of solids from the Evaporator tank. A screw conveyor is mounted in the custom designed dehydrator bottom. Upon actuation the screw conveyor transfers the solids laterally to an inclined conveyor or is pumped per application. The inclined conveyor extends upward above the evaporator, solution level and deposits the sludge material into the owners drum or Fen-Tech Solids Dewatering System.

All wetted surfaces are 304 stainless steel 3/16" wall thickness on models 100 thru 500. For those installations processing effluent containing chlorides in their waste water streams, our exclusive Chloride Corrosion Pkg. is available as an option.

Fen-Tech Environmental Inc., 4306 S. Hwy. 377, Brownwood, TX 76801. Tel: 915-646-5508; Fax: 915-646-7027.